HOMA MXS 2460-PU104

Pumpen leveres med nyt pumpehus og skildring. Renoveret

Submersible sewage pump 50Hz
MXS2460-P104

Application
Pump is suitable for pumping sewage, effluents,
sludge and surface water.

Pumped medium:
Sewage, effluent or sludge containing soft
solids. Max. medium temperature: 0 °C...40 °C.
Short term up to 60 °C.
Design
Fully submersible, compact integrated
motor-pump unit consisting of:

Pump:
Single stage centrifugal pump with horizontal
discharge DN100.

Impeller:
Enclosed single channel impeller with
replaceable wear ring for liquids containing
impurities and sludge with solid particles+
and long fibres.
Spherical clearance 100 mm.

Motor:
Electric motors, with
4-pole motor speed.
Insulation class H, degree of
protection IP 68.Thermal sensors embedded
in the stator winding protect the motor
from overheating. PTC sensors on request.
With seal probe in oil chamber.

Motor cooling:
Motors for submerged operation are
cooled by the surrounding liquid.

Operation:
Continuous operating duty (S 1) with a fully
submerged motor.
Shaft/Bearing:
Large diameter stainless steel rotor shaft,
pre-lubricated bearings.

Seals:
Combination of two mechanical seals
(silicon-carbide/silicon-carbide) in a separate
oil chamber. Oil inspection from outside.

Materials:
Motor housing: Grey cast iron EN-GJL-250
Pump housing: Grey cast iron EN-GJL-250
Impeller: Grey cast iron EN-GJL-250
Wear ring: Bronze
Motor shaft: Stainless steel 1.4104
Bolts: Stainless steel
Elastomers: Nitrile Rubber
Mechanical seal on medium side: SiC / SiC
Mechanical seal on motor side: SiC / SiC
Upper Bearing: Deep Groove Ball Bearing

Technical Data:
Flow: 350.0 - 50.0
Head: 7.4 m - 29.1 m
Power input P1: 22.0 kW
Power output P2: 19.3 kW
Frequency: 50 Hz
Rated voltage: 400 V
Type of current:3~
Rated current: 36.5 A
Starting mode: Star-delta
Discharge Port: DN100
Weight: 239 kg
Nominal speed: 1450 1/min

Cable type: H07RN8-F PLUS - 7G2,5
Pilot cable type: H07RN8-F PLUS - 5G1,5
Cable lenth: 10 m

Make: HOMA

Motor:
Electric motors, with
4-pole motor speed.
Insulation class H, degree of
protection IP 68.Thermal sensors embedded
in the stator winding protect the motor
from overheating. PTC sensors on request.
With seal probe in oil chamber.

Motor cooling:
Motors for submerged operation are
cooled by the surrounding liquid.

Operation:
Continuous operating duty (S 1) with a fully
submerged motor